Jump to content
GreenSock

Search In
  • More options...
Find results that contain...
Find results in...

X10

Members
  • Posts

    94
  • Joined

  • Last visited

Everything posted by X10

  1. Hi Carl, Thanks for the welcome. I think scrollRect would be a good subject for a tutorial, it has baffled me how it works, I had to play with it for ages before I tried changing the registration point. I still don't understand the logic of Top, Bottom, x, y etc., I only figured it out through trial and error. The documentation for it could be more comprehensive I think, or at least some examples with explanation.
  2. Okay, figured it out! I set the registration point to the bottom and immediateRender to true! Thanks for looking! X10
  3. Hi All, I've just got back into AS3 & Flash, and Greensock of course, but I'm having some trouble with the scrollRect Plugin. I have an mc on stage that I want to 'reveal' from the bottom upwards, if that makes sense. However whatever I try with the scrollRect plugin I can't seem to get right! It would be the opposite of this: TweenLite.from(mc, 4.5, {scrollRect:{ y:0, bottom:-mc.height}}); Using the above code, the reveal comes from the top, but I want it to come from the bottom. Any advice on values greatly appreciated! X10
  4. Hi ngrinchenko and welcome to the Greensock forums. Taking on board what Carl responded with in your other thread the "Delay" property can be used to delay tween to the same MC: TweenLite.to(dot_mc, 1, {_y:55}); TweenLite.to(dot_mc, 1, {_x:55,delay:1}); TweenLite.to(dot_mc, 1, {_alpha:55,delay:2}); First dot_mc will move along the y axis to 55, a second later on the x axis to 55 and after another second it will alpha to 55. You may want to consider using TimelineLite which I believe also works with AS2, though again not sure if it works 100% with Flash MX 2004. I hope that helps, post back if you need further advice. X10
  5. Hi All, This is my first time using LoaderMax so I thought I'd try something simple, but even after reading the documentation and several posts on the forum I'm having trouble. What I'd like to do is load 2 SWF's (that have been built with AS3 and TimelineMax) and play the first one, then when it completes, play the second one, then when that completes loop through back to the 1st and repeat. The code below gets the swfs fine, but they play as soon as they're loaded, and I know 'autoPlay:false' only deals with the playhead, so doesn't work for TimelineMax based animations. I also read up a little on rawcontent, but I'm still missing something key here. I also had a look at this (viewtopic.php?f=6&t=4673) but I think it just confused me more, any help would really be appreciated! X10 import com.greensock.*; import com.greensock.loading.*; import com.greensock.events.LoaderEvent; import com.greensock.loading.display.*; //create a LoaderMax named "mainQueue" and set up onProgress, onComplete and onError listeners var queue:LoaderMax = new LoaderMax({name:"mainQueue", onProgress:progressHandler, onComplete:completeHandler, onError:errorHandler}); //append several loaders queue.append( new SWFLoader("Clip1.swf", {name:"childClip1", estimatedBytes:200000, container:this, /*x:250,*/ autoPlay:false}) ); queue.append( new SWFLoader("Clip2.swf", {name:"childClip2", estimatedBytes:200000, container:this, /*x:250,*/ autoPlay:false}) ); //prioritize the loader named "childClip1" LoaderMax.prioritize("childClip1"); //start loading queue.load(); function progressHandler(event:LoaderEvent):void { trace("progress: " + event.target.progress); } function completeHandler(event:LoaderEvent):void { var SWF1:ContentDisplay = LoaderMax.getContent("childClip1").rawContent; var SWF2:ContentDisplay = LoaderMax.getContent("childClip2").rawContent; SWF2.rawContent.pause(); trace(event.target + " is complete!"); } function errorHandler(event:LoaderEvent):void { trace("error occured with " + event.target + ": " + event.text); }
  6. I've checked again and seems to be fine now! Thanks Jack.
  7. Hi stevemac, welcome to the Greensock forums! Have you tried passing "immediateRender:false" into your vars? Check out the Tweening Tips and Tricks here: http://www.greensock.com/tweening-tips/ timeline.append( TweenLite.to(button_instance, 0, {_visible:true,immediateRender:false})); Also, to save you some code, depending obviously on how the rest of your flash works, you could use a from Tween instead: timeline.append( TweenLite.from(button_instance, 0, {_visible:false,immediateRender:false})); Which would save you having to set the visibility of the button to false initially. Also, have you seen the autoAlpha Plugin? It may be of use to you: http://www.greensock.com/tweenlite/#plugins This sets the visibility of an object as well as it's alpha in one go. I hope this helps, let us know how you get on! X10
  8. Hi retropunk, Not sure if you solved your issue with the image that was too large, but this proof of concept might help: http://ximap.pl/2010/05/04/534/ X10
  9. Hi retropunk, What is the size of the object you are trying to apply the style to? The only thing I've seen with errors reporting an area too large to be drawn are when the object breaks Flash's pixel limits, see here: http://www.bit-101.com/blog/?p=1426 Not sure this relates exactly to what you are doing though. X10
  10. Hi spizer, Your code should work from what you've posted. Is there any chance you could post a simple use case scenario FLA with the offending behaviour? I assume you tried tracing the alpha value after each sprite is tweened to see what it's returning? Also, you can set the Overwrite value on a per tween basis, so you're not limited to the default value: http://www.greensock.com/overwritemanager/
  11. HI Grandpaw Broon, Welcome to Greensock! TimelineLite/Max has a lot of control, you can stagger or sequence. This video might help you with the basics, the sequencing stuff is about 3/4's the way into the video (at '12:30 ish): http://www.greensock.com/timeline-basics/ You can also see the documentation here: http://www.greensock.com/as/docs/tween/ You could probably use "TweenAlign.START" for what you are looking to do, if I understand your query, but you would need to remove the delays. With the overwriting of tweens, this would probably be an OverWrite Manager issue, with the defaults differing between TweenMax and TweenLite. However, if you are using TweenMax.to(mc,1,{alpha:1}); TweenMax.to(mc,1,{scaleX:1,scaleY:1, delay:0.5}); That should work as expected. (Assuming of course your mc is not already at those values!) Have a look in the OverwriteManager documentation for a breakdown of the overwrite options: http://www.greensock.com/as/docs/tween/ ... nager.html Perhaps you can show us some code so we can see exactly where it's going wrong.
  12. Hola jeanramirez, To solve the issue of "tipoPaint" always being 23, you would need to put the line: tipoPaint = [i] inside the for loop, at the moment it is outside the for loop, so when you run through your loop, i goes up each time an item is in your tipoArray, so reaches 23 and stops. So you would want to have: for(var i:int = 0; i < tipoArray.length; i++) { tipoArray[i].buttonMode = true; tipoArray[i].addEventListener(MouseEvent.ROLL_OVER, tipo_onOver); tipoArray[i].addEventListener(MouseEvent.ROLL_OUT, tipo_onOut); tipoArray[i].addEventListener(MouseEvent.CLICK, tipo_onClick); tipoPaint = [i] trace(tipoPaint); } However, I'm not sure just moving it to the correct place is going to solve your query. Let us know if that helps you any more and post back! X10
  13. Hi tikiri, There are a few ways you could do this, but the best one I know of is to use the onReverseComplete property when you instantiate your timeline: var timeline:TimelineLite = new TimelineLite({onReverseComplete:timeline.clear}); Have a look at the timelinelite Documentation for an explanation: http://www.greensock.com/as/docs/tween/ Let us know how you get on and post back if you have any other questions! X10
  14. Hi richtea, Welcome to the Greensock Tweening Platform I think the Frame Plugin will help with this query, check out the Plugin Explorer, there will also be some example code you can use: http://www.greensock.com/tweenlite/#plugins You may need to combine this with TweenMax's FromTo method depending on how you want to acheive the result: http://www.greensock.com/as/docs/tween/ You may also wish to check out Carl Schooof's excellent tutorial Bulletproof TimelineMax page transitions, it's in 3 parts, but this link will take you to the overview: http://www.snorkl.tv/2011/03/teaser-bul ... ansitions/ X10
  15. Hi MDiddy, Not the complete solution to your question, but something I think will help (if I've understood what you're asking) is Carl Schoof's post on navigating using TimelineLite and labels: http://www.snorkl.tv/2011/01/navigate-a ... d-tweento/ Am sure others will chip in to provide more details. X10
  16. Hi all, I have managed to create a partial solution, but need a bit of help to get the final bit working. The line is drawn following the tweening of an elliptical point, this code on it's own works fine. However, if I place this into an animation that has moveiclips already on stage, the elliptical point shows as the uppermost object on top of everything else, but the line that is drawn is at the bottom/underneath all the objects, so you don't see it. What am I missing here to get it to draw above some objects? import com.greensock.TweenMax; import com.greensock.plugins.BezierThroughPlugin; var xA:Array=[0,250,50,500]; var yA:Array=[0,100,200,200]; var bezierObj:Object=BezierPlugin.parseBeziers({"x":xA,"y":yA},true); var sp:Shape =new Shape(); sp.graphics.beginFill(0xff0000); sp.graphics.drawEllipse(-5,-3,10,6); sp.graphics.endFill(); addChild(sp); function drawme(ZA):void{ graphics.lineStyle(2,0xff0000); graphics.lineTo(ZA.x,ZA.y); } TweenMax.to(sp,5,{bezierThrough:[{x:250,y:100},{x:50,y:200},{x:500,y:200}],onUpdate:drawme,onUpdateParams:[sp]});
  17. Czesc undefinedman, The demo, would not load for me, however, have you tried using ROLL_OVER/OUT instead of MOUSE_OVER/OUT, not sure this will fix your problem looking at your code snippet, but worth a try. X10
  18. That's great! If you have a link you can share with us I'm sure people here would really like to see your completed work X10
  19. Not sure if this will fix the issue you have but just a note, as jamiejefferson mentioned, TweenLite doesn't yoyo: TweenMax.to(e.target, .5,{x:_posX, ease:Linear.easeNone, yoyo:true, repeat:1});
  20. Hi Spectre90, There's just a small addition you need to set when you instantiate your TimelineLite, you need to set it to 'paused' if you don't want it to play straight away: var ADtimeline:TimelineLite = new TimelineLite({paused:true}); I hope that helps, let us know if you run into any more problems. You may also find the documentation a good resource: http://www.greensock.com/as/docs/tween/ X10
  21. Hi radd, Not had a chance to see the animation yet, but looking at your code and the explanation the following might help: http://www.greensock.com/tweening-tips/
  22. X10

    Shape tween

    Hi user112, I'm not sure exactly what you want to acheive from your tween and exactly what you're not getting from your code: TweenLite.to(mc, 4, {alpha:1, scaleX:1.5, scaleY:1, ease:Elastic.easeOut}); This will tween the instance of mc over 4 seconds to an alpha of 1, the scale of X to 1.5 times it's original and the scale of Y to 1 using an elastic ease. You can use the Hex Colours plugin (see here http://www.greensock.com/tweenlite/) to tween the gradient. If you want this to happen on a rollover you need to attach it to an EventListener, see this resource for some help: http://www.republicofcode.com/tutorials ... as3events/ I hope this helps, let us know how you get on. X10
  23. Hi mspanish, I'm a bit confused with what it is you're trying to tween. You have page1-5 tweend in your original code, but then in the replaced code you turn "string1_txt" into a SplitTextField, as well as the page1-5 mc's. What is "string1_txt" and the actual problem?
  24. SplitTextField is quite awesome, and Carl did a pretty great job of the tutorial. The Greensock autoAlpha Plugin already deals with Visible, so that it sets Visible to False once the Alpha reaches Zero (and vice versa): http://www.greensock.com/as/docs/tween/ ... lugin.html Check Out the autoAlpha Plugin example in the Plugin Explorer: http://www.greensock.com/tweenlite/#plugins
×